• SkyPDF
  • SkyAgent
  • SKYCOM
  • SkyPAS
  • 会社情報
  • 採用情報

SKYCOM


ANA Printing Service at ANA Loungejapanese/English


The function of printing secured by IC card, which corresponds to multi kinds of printers, is provided at this lounge printing service. After executing printing job on your PC, you can print out your documents securely through identification via placing your mileage card on the IC card reader. You may cancel your printing job on the screen at the card reader and prevent unnecessary printing. Your printing job is carried out only after you identify yourself by your mileage IC card, thus you can use this printing service under safe and secure conditions.

 

 Steps for this service


ラウンジ内インターネット接続サービス

For printing service, it is necessary to connect your PC to internet.
Please see "Internet connecting service at lounge" on ANA Home Page.

It is necessary to choose "Airport lounge name" from the menu of the "driver exclusive for lounge printing service".


How to install the "driver exclusive for
lounge printing service"
 

How to set up the "driver exclusive for
lounge printing service"
 

Steps for printing 

Setting up your PCSetting up your PCSetting up MFPSetting up MFP

For non-members of ANA mileage club

For ANA mileage card member who left his/
her mileage card behind
 

For persons who will use USB drive

※ For USB drive users, only PDF can be printed out. Please convert your documents to PDF before using this printing service.
For conversion to PDF, SkyPDF is required. Please use the following software.


For viewing PDF → Please usea PDF Viewer software.

For converting to or creating PDF → Please usea PDF Generater software.

 

  How to install the driver exclusive for lounge printing service


1. DownloadSetting up your PC

Before download, please find your PC's OS version and select the appropriate version from OS versions located below.
Please download "Sky Universal Pro Printer ANA" driver to your PC.
How to find OS version of your PC


5.32 MB


5.73 MB


installation package


Select and double-click downloaded exe file and start installation.


2. InstallSetting up your PC

Install
 

When "File Download" pop-up menu file screen is displayed, please select "Run" and open file.


If you have already installed "Sky universal Pro Printer" (different version of Sky universal Pro Printer ANA) driver to your PC, please proceed to installing "Sky universal Pro Printer ANA" as follows:
1.Uninstall of "Sky universal Pro Printer" driver
How to uninstall
2.Install
3.Restart
4.Choose your lounge and input your ANA mileage club card number


3. InstallSetting up your PC

Install

The pop-up menu of software downloaded will be displayed.
Choose "Run" and start installation of software ("Sky universal Pro Printer ANA" driver)


4. Install wizard will start.Setting up your PC

Install wizard
 

Follow the instruction displayed on pop-up menu and choose "Next" to install software.

 
top on the page


 

  How to set up printer driver exclusive for lounge printing service
First time users of lounge printing service is required to set up this driver.
Once set up in your PC, you can skip this procedure next time.


1. How to register your ANA mileageSetting up your PC
club card number

printer and FAX

2. How to register your ANA mileage clubSetting up your PC
card number

Registration settings

Click the "Registration setting" tab within "Printing set up", and register (input) your ANA mileage club card number (10 digits) or optional 10 digits number for temporary use.

After installing the driver, please proceed steps as follows:
"Start" → "Control Panel" → "Printer (different name depending on OS※1) → "Sky Universal Pro Printer" Right click on "Sky Universal Pro Printer ANA" and choose "Printing set up" .

※1   Windows 7: "Device and printer" 
  Windows Vista: "printer" 
  Windows XP: "Printer and FAX"
 

3. How to choose your airport loungeSetting up your PC

How to choose your airport lounge

 

If you are registered at North Pier,Setting up your PC
Please update your data.

Select lounge

Update to update lounge data. Members who chose lounge before click latest lounge data. After then, choose "Regist".


 


Click "Select lounge" tab → click "lounge selection" and choose the airport lounge you are now using. After completing set up, choose "Regist".


It is required to set up "choice of airport lounge"at "the driver exclusive for lounge printing service" to match the airport you are now using.

 
 
top on the page


 

  Printing procedure


1. Select printerSetting up your PC

Select printer

2. English is displayedSetting up MFP

mileage club card

Open the file you wish to print . Choose "Print" from "File" menu in the documentation data you wish to print. → Choose "Sky Universal Pro Printer ANA" → click "OK".

 

Please click Upper right "English".
you can view in English.


3. IdentificationSetting up MFP

mileage club card

4. Choice of menuSetting up MFP

Choice of menu

Identify yourself by placing your ANA mileage club card on the IC card reader located below the touch panel.

 

Menu will be shown on the screen of touch panel.


5. Choice of documents to be printedSetting up MFP

Choice of documents to be printed
 
6. CompletionSetting up MFP

Completion

All documents to be printed out will be shown on screen of touch panel.
Select printing job you want to execute from the documentation shown on the screen. Then click "Printout" .

 

Printing is completed. Please take your printed documents from tray.

 
top on the page


 

  For non ANA mileage club card members
 ※ Numbers you choose at your discretion is required for registration to enable you to use lounge printing service temporarily.


1. Registration for temporary useSetting up MFP

Registration for temporary use

2. Registration for temporary useSetting up MFP

menu

If you don't have ANA mileage club card, please touch the screen.

 

After the menu is displayed, please choose "If you not have a AMC card" from the menu.


3. Input your numbers and password.Setting up MFP

password

4. How to set up registrationSetting up your PC

Set up numbers for temporary use you had chosen in your PC.

Please refer to "How to set up driver exclusive for lounge printing service"

After setting up "the driver exclusive for lounge printing service". Please follow the procedure.

"For persons who left ANA mileage club card behind"

to print your documents.

For temporary use registration, first input numbers and password. (both are at your discretion). Then choose "OK" to complete your registration.

※ Your registered temporary use number is effective on this day only.
※ If another guest has already registered with the numbers of your choice, please choose different numbers.

 
 
top on the page


 

  For persons who left ANA mileage club card behind
※ It is required to input mileage number or number (at your discretion) for temporary use registration.


1. Registration for temporary useSetting up MFP

Registration for temporary use

2. Registration of ANA mileage club numbersSetting up MFP

menu

If you don't have "ANA mileage club card", please touch the screen.

 

After menu is shown on the screen, please choose "If you not have a AMC card".


3. Input mileage club card numberSetting up MFP
→ input password

password

4. Registration completedSetting up MFP

Print

Input "mileage club card number (10 digits) and "password".
Then click "OK" to complete your registration.

※ Persons for temporary use registration are required to make registration in PC. Temporary use number is effective on this day only.

Please refer to "How to set up driver exclusive for lounge printing service".

 

Returning to the first screen, please touch the screen and choose "Print".

Please refer to "Printing procedure". (Step 4 and afterwards)

 
top on the page


 

  For USB drive users, only PDF can be printed out.

 ※ Please convert your documents to PDF before using this printing service.


1. Connect your USB drive to USB port locatedSetting up MFP
at touch panel.

Registration for temporary use

First, convert your data to be printed into PDF. Then, connect your USB drive to USB port located at touch panel.


2. USB drive is identified.Setting up MFP

USB drive is identified.

After USB drive is identified, the message,"Reading" will be displayed.

 

3. Choice of documents to be printedSetting up MFP

USB drive
 
※. USB drive is identifiedSetting up MFP

USB drive is identifiedusb drive detected
USB message

A list of your PDF in your USB drive will be shown at the screen of touch panel.
Select printing job you want to execute from the documents shown on the screen.
Then click "Printout".

 

When USB is identified, the message "identification" will be displayed. While the message is displayed, you can continue your operation on the background screen.
When you touch "operation completed" at the upper right hand corner on the screen, a list of your PDF in your USB drive will be shown on the screen.
Please refer to "Choice of documents to be printed".

 
top on the page


 

  How to check your environment 


For Windows XP users

For Windows Vista / 7 users


1. For Windows XP usersSetting up your PC

Start

2. Setting up your PC

Setting up your PC

"Home" users → 32 bit version

"Professional"users →32 bit version

"Professional x 64 Edition" users → 64 bit version

"Start" → right-click "My Computer" then right click, and choose "property".


   


1. For Windows Vista / 7 usersSetting up your PC

Start

2. Setting up your PC

Properties

32 bit operating system users → 32 bit version

64 bit operating system users → 64 bit version

"Start" → right-click "My Computer" then right click, and choose "property".

   
 
top on the page


 

  How to uninstall 


1. For Windows XP usersSetting up your PC

start

2. Control PanelSetting up your PC

Control Panel

Click "Start" → choose "Control Panel".


 

At "Control Panel", choose "Program addition and delete*".
(* Wording and expression may be different depending on OS version.)


3. Program addition and deleteSetting up your PC

Program addition and delete

After deleting "Sky Universal Pro", please install the "Sky Universal Pro Printer ANA" driver.

Please refer to "how to install the driver exclusive for lounge printing service".


※2   Windows 7: "Program"
  Windows Vista: "Program and function"

Choose "Sky Universal Pro" at "Program addition and delete*" panel and select "Delete".
(* Wording and expression may be different depending on OS version.)


 
 





top on the page


サービスの導入

03-5807-6011

お問い合わせ・ご意見はこちら

お問い合わせフォームでも承っております。